Posted 06 January 2003 - 11:53 PM
Posted 07 January 2003 - 05:57 PM
Is there a formula for derating a drive when increasing carrier frequency?
I believe that this very much depends on the drive itself. So yes, there will be a way of working out the derating for a particular drive, but it will be different from the next one due to different losses. I do not believe that there is a standard formula that can be applied to all drives unless you apply a number of parameters particular to each individual drive.
Skype Contact = markempson | phone +64 274 363 067
LMPForum | Power Factor | L M Photonics Ltd | Empson family | Advanced Motor Control Ltd | LMP Software | Pressure Transducers | Smart Relay | GSM Control | Mark Empson Website | Soft Starters
Posted 22 May 2003 - 02:19 AM
Usually the information is contained within the installation or user manual provided with the drive. If it doesn't appear in the documentation, it's probably wise to contact the drive manufacturer.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users