Tell me is there any single phase output VFD. I need to drive a single phase motor through a VFD. Is there any please let me know.
Single Phase Vfd
Started by sharks, Feb 27 2008 11:12 AM
4 replies to this topic
#2
chrisevo
-
- Full Member
-
- 6 posts
Junior Member
- Gender:Male
- Location:England
Posted 27 February 2008 - 02:40 PM
See Here
http://www.acpd.co.u...-inverters.html
Actually this is a better link
http://www.invertek....idrive_e21.aspx
http://www.acpd.co.u...-inverters.html
Actually this is a better link
http://www.invertek....idrive_e21.aspx
#3
im4u_all
-
- Members
-
- 3 posts
Junior Member
#4
chrisevo
-
- Full Member
-
- 6 posts
Junior Member
- Gender:Male
- Location:England
Posted 28 February 2008 - 10:24 AM
QUOTE (im4u_all @ Feb 27 2008, 04:17 PM) <{POST_SNAPBACK}>
Link doesn't seem to work
Think this is what it was supposed to be
http://www.abb.us/ca...9f007561ee.aspx
#5
jraef
-
- Moderator
-
- 683 posts
Posting Freak
- Gender:Male
- Location:USA, California
Posted 03 March 2008 - 05:37 AM
Warning: Those ABB drives will NOT work./ They are for 1 phase input, but the OUTPUT IS 3 PHASE.
The Invertek drives are about the best thing going. You will find them over and over under several other brand names, but they are all made by Invertek.
The downside is, they only work on 2 types of 1 phase motors; PSC and Shaded Pole, both of which are of use in limited applications. Any other type of 1 phase motor and you will smoke the drive and/or the motor capacitors. MOST 1 phase motors are unfortunately of the type that you CANNOT use VFDs on.
The Invertek drives are about the best thing going. You will find them over and over under several other brand names, but they are all made by Invertek.
The downside is, they only work on 2 types of 1 phase motors; PSC and Shaded Pole, both of which are of use in limited applications. Any other type of 1 phase motor and you will smoke the drive and/or the motor capacitors. MOST 1 phase motors are unfortunately of the type that you CANNOT use VFDs on.
"He's not dead, he's just pinin' for the fjords!"
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
