hi there
i would like to ask about some technical information related to the motor drives,
the qustion is , what is the meaning of the drives macros .... ?
is these means some to configuration conveniance with the drive type and drives setting
please try to help me
best regards
botshe
Macros
Started by botshe, Oct 25 2008 02:00 PM
1 reply to this topic
#1
Posted 25 October 2008 - 02:00 PM
#2
Posted 29 October 2008 - 07:53 AM
Hello Bothshe,
Some drive manufacturers, for instance ABB, have got ready written macros available for typical applications. Macro is particularly helpful as it reduces the time for manual editing of parameters. You may have macro written for two-wire, potentiometer, PID, torque applications. The macros come with default parameters and the user is free to use them or change according to their neds.
Hope this help.
Bob
NB: I would also suggest that you post your question in the relevant topic to get a quicker reply.
Some drive manufacturers, for instance ABB, have got ready written macros available for typical applications. Macro is particularly helpful as it reduces the time for manual editing of parameters. You may have macro written for two-wire, potentiometer, PID, torque applications. The macros come with default parameters and the user is free to use them or change according to their neds.
Hope this help.
Bob
NB: I would also suggest that you post your question in the relevant topic to get a quicker reply.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users