Will It Work?
Posted 11 November 2009 - 05:40 PM
Posted 15 November 2009 - 05:55 PM
If you are using a VFD designed for use in USA, but installed in India, there should be no major issues except that there may be transformers and/or contactors within the VFD that are designed specifically for 60 Hz use. You need to check with the manufacturer to ensure that this is not a problem.
In regards to the motor on the output of the VFD, provide3d that the supply voltage is the same, and the motor is programmed up as a 60Hz motor, there will be no difficulty. If the voltage is different, then the output power of the motor may be altered.
Mark Empson | administrator
Skype Contact = markempson | phone +64 274 363 067
LMPForum | Power Factor | L M Photonics Ltd | Empson family | Advanced Motor Control Ltd | Pressure Transducers | Smart Relay | GSM Control | Mark Empson Website | Soft Starters
Posted 26 November 2009 - 04:00 PM
Your reply was helpful and i appreciate it. Thanks.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users