Contactor at Drive output
Posted 24 December 2005 - 01:24 PM
The freewheeling effect of motor gives feedback to VSD , especially if the VSD is driving a 2 pole pole motor and is stopped but motor keeps running..due to inertia.
Posted 25 December 2005 - 11:21 PM
Generally, you would not put a contactor on the output of a VSD. Most VSDs will be damaged if you control a contactor on their output. and so it must not be done. There are some manufacturers who claim that you can use a contactor on the output of their drives, but this is not normal.
Mark Empson | administrator
Skype Contact = markempson | phone +64 274 363 067
LMPForum | Power Factor | L M Photonics Ltd | Empson family | Advanced Motor Control Ltd | Pressure Transducers | Smart Relay | GSM Control | Mark Empson Website | AuCom | Soft Starters
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users