Superconductor In Energy Saving

Hello, I came across this forum while researching Energy saving units and was impressed with the quality of the replies, I’ve been in contact with a company that have developed a unit that they claim can reduce KWH without changing power factor or reducing voltage, this is part of an Email I received from them.

The chemical box consists of raw material which is elements performing superconduction phenomenon.
In fact, the superconductor can be happen at 0K (-273’c).
Many scientists and researchers tried hard to make superconductor can be happen at normal temperature (300K=27’c). But all failed.
For them, to make it happen at normal temperature is dream.
It is still being researched for many scientists.
But our president, Mr.Kim invented unit which can perform in normal temperature. In superconductor, there is no resistance.
Accordingly, it returns heat energy (inactive energy) loss by resistance to active energy.
If you input 220V and 10A, time pass by current will be increase about 12A because of heat energy increase by resistance.
So you have no choice but to input 220V, 12A.
But by installing our unit, it keeps current stable not to increase.
P(w)=V*I*Cos θ(power factor)
According to decrease the current (I), accordingly Kwh(P) also decreases.
In any countries, Kwh (accumulated value on power=kwh meter) is criteria for electricity bill by power company.
We say KW is instant value and KWH is accumulated value.
Long time ago, there were many manufacturers dealing with V or Cos θ
For reducing Voltage, voltage dropping power saver was invented.
But they after all failed because dropping voltage affect harmful damage to machinery finally it reduces product time of machinery.
At second, Capacitor type power saver which applied Power factor was invented
It can increase power factor. Increasing power factor means customer use electricity effectively.
But according to increasing power factor, KWh also increase.
It means it never effect power saving.
Most important thing for power saving is to reduce KWh.

This unit is connected across the three phases and neutral of the main isolator.
We have a Supermarket where most of their load consists of refrigerators and coolers, their monthly bills are very regular and would make an ideal location to test such a unit. They have ct metering which displays KWH. We are now at the point where we need to order a unit to test, these units are not cheap and we would welcome your input before we make the next step.
Regards, John m.