ram14375 Posted January 20, 2009 Report Share Posted January 20, 2009 dear everybody, Is there any safe setting value for thermal time for motors(suppose if we dont have the data from the motor manufacturer) how to set a safe value ram Link to comment Share on other sites More sharing options...
marke Posted February 1, 2009 Report Share Posted February 1, 2009 Hi ram The maximum start time varies from around 10 seconds to over 40 seconds depending on the motor design. If you are looking fora safe value, then 10 seconds should be pretty safe with most motors that I have come across. The big issue is whether this is long enough to start your load. Best regards Mark. Mark Empson | administratorSkype Contact = markempson | phone +64 274 363 067LMPForum | Power Factor | L M Photonics Ltd | Empson family | Advanced Motor Control Ltd | Pressure Transducers | Smart Relay | GSM Control | Mark Empson Website | AuCom | Soft Starters Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now