Jump to content
LMPForum

Twido Plc Ethernet Connection


JonAW
 Share

Recommended Posts

Hi guys,

 

I'm in the middle of trying to set up an ethernet connection to a telemecanique twido which I have pre programmed and tested using the serial lead. I have had to use a compact unit with a twido port add on due to the customers late specification of wanting to connect the plc to a modbus tcp/ip network to view telemetry signals.

 

The twido port is assigned its IP address from the Twido PLC directly. I have this set up and using command prompt I can ping the twido port successfully. However I cannot establish a connection using the twido suite software. Can anyone offer any suggestions?

 

I am using a temporary IP address 84.168.0.1 for my computer and 84.168.0.2 for the twido port. The subnet mask is 255.255.255.0 on both items.

 

thanks for any help.

 

Jonny

Link to comment
Share on other sites

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...